Accessories & Co
Heat meters
HM 1,5–15
Multical® 403 with integrated Kamstrup M-Bus module is a robust, static heat meter based on ultrasound.
The meter is intended for energy measurement of almost all types of thermal installations with water as the energy carrier. It consists of a calculator, a flow sensor and two temperature sensors and is designed to measure energy consumption in flats, detached houses and multiple-dwelling residences, housing associations, multi- storey buildings and small industries.
Your Benefits
Heat meters
HM 1,5–15
- Easy to install – on the wall or on the Hargassner accumulator
- Meter program with nominal flow from 1.5 m3/h to 15 m3/h
- Temperature range of 2 – 180 °C
- Components matched to Hargassner products
- Calibrated flow meter
- Minimal measurement deviations even under unfavourable installation conditions: +/- 0.5%
- Low pressure loss
- HM Multical MC 603 with frost protection available on request
Hargassner M-Bus Converter
Must be ordered in addition!
The 1.5 and 2.5 m³/h heat meters can be integrated into a Hargassner substation and of course connected directly to the Hargassner controller (M-Bus converter optional). All our heat meters from 1.5 to 15m³/h can be used with any Hargassner boiler.
The data is automatically transferred to the Hargassner controller by the additional “M-Bus converter” module and can therefore be read on the boiler display and on the web.
Technical Data
| Type | WMZ 1,5 | WMZ 2,5 | WMZ 6 | WMZ 10 | WMZ 15 | |
|---|---|---|---|---|---|---|
| Flow rate qp | m³/h | up to 1,5 | up to 2,5 | up to 6,0 | up to 10 | up to 15 |
| Size DN | mm x inches | 130 x 3/4″ | 130 x 3/4″ | 260 x 1″ | 300 x 1 1/2″ | 270 x FL DN50 |
Components of the heat meter installation set
WMZ 1,5 / WMZ 2,5 / WMZ 6
2x ball valves with union nut
1x ball valve with immersion sensor connector
1x pipe nipple
WMZ 10
2x ball valves with union nut,
1x ball valve with internal thread,
1x pipe nipple; customer has to provide
T-pieces and immersion sleeves for cable sensors
WMZ 15
2x ball valves with external threads,
4x DN50 flanges, 2x DN50 flange seals,
1x ball valve with internal thread
1x pipe nipple
Customer has to provide T-pieces and immersion sleeves for cable sensors
You might also be interested in
News, Events & References
Filter news & facts
and find all information you need
CompanyNews
UK team at Hargassner’s headquarters in Austria
Celebrating 40 years of Hargassner and exploring the world of biomass heating technology
News
Information & Construction Progress Hargassner Service Center
Expansion project Weng i. I. (Austria)