Skip to content
Back to the news

BlogNews

Combining a hybrid heat pump with gas

The smart middle ground

Hybrid gas heating

Your gas bill is going up – but your heating system is still working perfectly. In this situation, completely replacing the system simply feels like the wrong thing to do – and quite rightly so. If you add a hybrid heat pump to your gas heating system, you don’t have to make that decision at all: The heat pump takes over part of the heating load, rather than replacing the existing system.

This article explains how it works technically, what your home needs for this, and what costs you can expect.

Is it worth it? How it works Things to know Costs, savings & funding

Is that possible, and is it worth it?

Combining a heat pump with gas heating

Yes, and not as a stopgap solution, but as a technically proven approach that makes particular sense if the existing system is still operating reliably. The concept is very straightforward: a hybrid heat pump works in tandem with the gas heating system. The control system coordinates the use of both heat generators to match the current heating demand. The heat pump handles the majority of the heating load, whilst the gas heating system serves as an additional heat output reserve.

With its air-to-water heat pumps, Hargassner offers the perfect solution for precisely this application. It can be integrated into existing systems and, together with the gas boiler, forms a modern hybrid heating system that combines flexibility with security of supply. As a rule, the existing system remains fully intact, including the existing radiators.

But how does the system actually decide for itself when to use gas and when to use the heat pump?

Hybrid gas heating: How the combination really works in everyday life

If you combine gas heating with a heat pump. you get a system that constantly adapts. Depending on the building, the system design and the weather conditions, the heat pump can provide a large proportion of the heat supply, particularly during the transitional seasons and in the warmer months. During this time, the gas heating system remains on standby and only kicks in when it is really needed – for example, during severe frost.

When does the heat pump run, and when does the gas heating run?

The key term is the bivalence point: the outdoor temperature below which the heat pump alone is no longer economical to operate and the gas heating system takes over. Above this threshold, the heat pump provides the majority of the heat supply.

The control system manages this switchover automatically. It continuously analyses:

  • outdoor temperature
  • current energy prices
  • weather forecasts
  • heat pump operating data

This results in a system in which the gas heating system and the heat pump do not need to be controlled manually.

How does the hybrid system operate over the course of a year?

Depending on the model and operating conditions, the heat pump can achieve a SCOP value of more than 5*. This means that, over the heating season, it can provide several kilowatt-hours of heat for every kilowatt-hour of electricity consumed. This has clear benefits in day-to-day operation:

  • The heat pump can handle the heating load for large parts of the year
  • In summer, the heat pump also handles domestic hot water preparation
  • The gas heating system remains inactive during this time

The system is available as a hybrid heat pump and can be combined with a photovoltaic system if required.

When integrated appropriately, any surplus PV energy can be used to power the heat pump. This increases the proportion of self-generated electricity used for heating.

*AirPro 310, 515 and 620: Energy efficiency class A+++ and SCOP 5.07 / 5.21 / 5.34 at 35 °C in accordance with EN 14825 (moderate climate)

What do I need to know?

Retrofitting a heat pump alongside an existing gas heating system

Many homeowners hesitate at this stage because they fear a major construction project. In practice, retrofitting is usually much simpler. In most cases, adding a heat pump to a gas heating system means that the existing system remains in place, with only a few additional components being added.

What’s staying and what’s being added?

The gas boiler, the existing pipework and, in most cases, the radiators can remain as they are. The system is simply supplemented by the heat pump’s outdoor and indoor units, as well as, where necessary, a defrost accumulator tank in the boiler room. The defrost accumulator tank ensures that the outdoor unit has sufficient energy available for the defrosting process. The installation itself is usually completed within a few days.

What requirements must my house meet?

A complete refurbishment is not necessary. There are three key points to bear in mind:

  • A suitable location for the outdoor unit, such as in the garden, against the wall of the house or on the roof
  • If necessary, sufficient space in the boiler room for the defrost accumulator tank
  • A heating system that is still in working order

Even higher flow temperatures are not a deal-breaker in a hybrid system. Particularly in existing properties, it is worth looking at the experience gained with heat pumps in older buildings.

For whom is retrofitting particularly beneficial?

Retrofitting is particularly suitable if the existing gas heating system is still running reliably, no complete overhaul is planned and the refurbishment is to be carried out step by step. The hybrid system is not a compromise, but a deliberate strategy: the gas boiler is retained as a backup and can be replaced at any time in the future.

For existing buildings with slightly older heating systems, the article on hybrid heating in older properties also highlights which combinations have proven effective in practice.

Costs, savings & funding

Hybrid heating system combining gas and a heat pump

The investment costs depend on the building, the existing heating system and the system design. During normal operation, the heat pump can reduce gas consumption by meeting part of the heating demand. How this affects heating costs depends in particular on the system design and on gas and electricity prices.

What savings can be made?

The following overview shows a sample calculation for an unrenovated detached house with a floor area of 150 m², an annual heat demand of 30,000 kWh, and an assumed gas price of €0.17/kWh and electricity price of €0.35/kWh:

Configuration Heating system Savings per year (approx.)
Without PV Radiators ~€600
Without PV Surface heating (e.g. underfloor heating) ~€1,400
With PV Radiators ~€1,000
With PV Surface heating (e.g. underfloor heating) ~€1,700

The figures are an example and do not represent a generally applicable forecast of savings

Under the assumptions used in this sample calculation, the calculated annual heating cost savings range from approximately €600 to €1,700 if the heat pump covers two-thirds of the heat demand, including domestic hot water preparation. The actual savings depend on the building, the system design, its operation and the prevailing energy prices.

Funding: What are the options?

Depending on the system configuration and the current funding programme, subsidies can significantly reduce investment costs. Anyone wishing to make long-term savings on heating costs should also factor in subsidies at an early stage, as they form part of the overall calculation. The subsidies available for heating systems vary depending on the system design and the funding programme.
As funding conditions change regularly, it is advisable to seek personalised advice, which will clarify which funding programmes specifically apply to your situation.

Find a contact person

When is each option suitable?

A hybrid heat pump combined with gas or a complete switch?

Not every home needs the same solution. A hybrid heat pump combined with gas can be a sensible interim step – particularly if the existing system is still working reliably and no complete conversion is planned.

This is a typical scenario: the gas boiler is working, the budget needs to be used wisely, and the renovation is taking place step by step. In such cases, the hybrid system can reduce gas consumption by having the heat pump cover part of the heat demand without immediately replacing the existing system.

A complete switch, on the other hand, makes sense if the boiler is nearing the end of its service life, a full renovation is planned, or the aim is to replace the gas boiler with a heating system that does not use heating oil or natural gas as fuel. The article on alternatives to gas heating provides an overview of the options available. The guide to the best heating systems for old buildings shows which systems work particularly well in existing buildings.

Best heating system for an older property

Gas & Heat Pumps: Find the right hybrid solution now

Ultimately, what really matters becomes clear: the hybrid system does not replace a system that is still working, but combines the advantages of both worlds and makes the most of them. Reliability is maintained. Gas consumption can be reduced. Comfort increases.

An independent jury has also confirmed the innovative potential of this approach: The EnergieGenie 2026 award for the Hargassner Hybrid Package confirms its recognition with the EnergieGenie 2026 award.

The next step is no longer about theory, but about your specific home. A heating expert will carry out an on-site assessment to determine which solution makes sense, tailored to your building, its use and your objectives.

Find a contact person now

In your region

Contact us
for individual

consultation

Contact us