Accessible up to max. one ton axle load
Bunker filling lid
To enable the filling system, especially the filling trough, to be placed individually within a project, Hargassner offers a perfectly matched bunker filling lid that can be driven over with a maximum of 1 tons (1,000 kg) axle load. Optionally, a corresponding cover plate for the motor resp. an extension, and a pipe feedthrough for the Hargassner filling system (BSS-WV, BSS-IA, BSS-AA) can be utilized. In addition, the bunker cap can be used not only to cover filling system troughs but also for filling openings in recessed wood chip storage facilities.
For increased storage requirements
Double bunker filling lid
For projects with increased storage requirements, Hargassner also offers a high-quality double bunker filling cover, specially designed for larger filling openings. Its robust construction allows safe drive-over capability with up to 1 tonne axle load. Optional cover plates for the motor, as well as an extension and a pipe feed-through for the Hargassner filling system (BSS-WV, BSS-IA, BSS-AA), can also be fitted. Ideal for systems where two filling systems are used.
Advantages
Bunker filling lid
driveable
- Robust steel construction
- Driveable bunker lid, suitable for up to 1 t axle load
- Galvanized steel design for long service life
- Individual and flexible planning
Driveable bunker filling lid in practice
Filling lid for underfloor wood chip storage.
Filling lid for underfloor heating module.
Technical data bunker filling lid
- Driveable bunker lid, suitable for up to 1 t axle load for filling trough 2.80 m (or 2 x 2.80 m)
- Covering 500 mm for bunker lid for motor or extension
- Covering pipe feedthrough for BSS-WV for bunker lid
| Unit | Bunker filling lid | Double bunker filling lid | |
|---|---|---|---|
| External dimensions with the lid closed | mm | 2,940 x 1,060 x 160 | 3,170 x 1,890 x 165 |
| Height in installed state (floor to lid top edge) | mm | 25 | 30 |
| Suitable for trough size | m | 2.8 | 2 x 2.8 |
| Weight | kg | 177 | 350 |
| Maximum wood chip size | P45S | P45S | |
| Foundation requirement* (L x W x D) | mm | 2,740 x 850 x 760-850 | 2,950 x 1,700 x 760-850 |
* The minimum requirement to ensure stability is a foundation at frost depth with at least 1 m of class C16 / 20 (B15) unreinforced concrete. For the length of the installation clearance when combining with cover plate sets, add the respective plate widths to the 2,740 mm (double bunker filling lid: 2,950 mm) and subtract 22 mm minimum support surface per end face. For a pipe penetration through the foundation, make the wall opening in accordance with the instructions for the corresponding refuelling systems.
News, Events & References
Filter news & facts
and find all information you need
