Skip to content
Back to the news

News

How to make your heating system even better

Practical retrofit solutions for greater comfort, safety and new possibilities

A heating system can often do more than you might think. With the right extensions and retrofit solutions, existing systems can be enhanced with additional functions, their operation modernised, or new capabilities introduced, such as cooling, pool heating or integration into a microgrid.

Which solution is right for your system depends on what you want to achieve with it. We’ll show you various ways in which you can get the most out of your Hargassner heating system.

Which topics are of interest to you?

I’d like to…

  1. provide additional backup for my underfloor heating
  2. cool effectively using my heat pump
  3. combine a wood log boiler with a heat pump
  4. modernise the operation of an older Hargassner pellet heating system
  5. heat my swimming pool via the central heating system
  6. connect additional buildings via a microgrid
  7. make ash disposal more convenient
Provide additional protection for underfloor heating

Safety thermostat for underfloor heating

If an underfloor heating system becomes too hot, the screed or sensitive floor coverings may be damaged. This is where the safety thermostat comes in: it monitors the temperature of the underfloor heating system and intervenes before critical temperatures are reached. Installation is straightforward and can be carried out by an installer, eliminating the need for complex custom-built solutions.

This means the underfloor heating system can be safeguarded with a comparatively small additional component.

In short: monitor the temperature, safeguard the underfloor heating and protect the floor structure and sensitive floor coverings.

Contact your Hargassner installer now

Heat pump:
More options for heating and cooling

An air/water heat pump can do more than just provide heating. Depending on the existing heating system and the building, further functions and additions are possible.
However, when it comes to cooling in particular, the existing heating and cooling surfaces, as well as the appropriate safety measures, play an important role.

Cooling with a heat pump

A Hargassner heat pump can also be used for cooling in summer. The extent of the cooling effect depends largely on the available heating or cooling surfaces.

Underfloor heating (3 out of 5 points):
It allows for gentle cooling of rooms by around 2–3 °C. It is important to note that vinyl flooring or large carpets can reduce the cooling effect.

Ceiling cooling (5 out of 5 points):
It is particularly well suited to cooling rooms.

Fan coil units (5 out of 5 points):
Unlike standard radiators, these allow for active cooling of rooms.

The actual cooling capacity achievable should therefore always be assessed on the basis of the existing heating and cooling system.


Keep an eye on the dew point

Anyone using their heat pump for cooling should also take condensation into account. If the flow temperatures are too low, moisture can form on the pipework in the screed or on the ceiling. A dew point monitor tracks humidity levels and detects the risk of condensation forming. This helps to protect the floor structure, ceilings and pipework from moisture.

Good to know: The dew point monitor can also be retrofitted to Hargassner heat pumps, ensuring safe cooling operation.

Ask your local Hargassner partner

Combining a wood log boiler with a heat pump

Combining two heating systems: Combining a wood log boiler with a heat pump opens up additional heating options.

Hybrid system: wood log boiler & heat pump

Greater comfort by combining a wood log boiler with a heat pump

A wood log boiler can also be easily upgraded with a Hargassner heat pump, which significantly improves comfort.
Depending on your requirements, the heat pump can be used in various ways:

1. Heat pump as a secondary heat source
The heat pump is sized smaller. During the transitional periods – that is, in spring and autumn – it takes over the task of heating the house and providing hot water. It also provides pleasant cooling in summer. During the winter months, the wood log boiler remains the main heat source.

2. Heat pump as the primary heat source
In this scenario, the heat pump is sized larger and covers the house’s entire heating requirement throughout the year. It provides heating and hot water in winter and can be used for cooling in summer.
The wood log boiler can still be used at any time. As soon as the wood log boiler is fired up, the heat pump switches off automatically and remains on standby until it is needed again.

Discover hybrid heat pumps

Good to know: Whichever option you choose, the wood log boiler can be used at any time of year. This means you can decide for yourself which heat source to use.

Contact your local Hargassner partner now

Targeted upgrades to an existing heating system

Sometimes, there is no need to make fundamental changes to the existing heating system. With the right extension, additional functions can be integrated into the system control or everyday processes can be simplified.

Heating the pool via the central heating system

Controlling the pool heating circuit with Additional board P

If the pool is also to be integrated into the heat supply, Additional board P provides a suitable extension option. It is used to control the pool heating circuit in single-circuit operation. The pump control can be configured either as speed-controlled via a PWM signal or for constant operation. This allows the pool heating circuit to be integrated into and controlled via the heating system control.

Good to know: The pool control system remains in place; the ZSP-P simply supplies heat when it is needed.

Ask your Hargassner installer for advice

Making pellet deliveries easier

When pellets are delivered, both the boiler and the pellet tanker’s extraction fan need to be taken into account. A building connection box makes this process more convenient and saves time.

The building connection box is fitted to the outside of the building, either surface-mounted or flush-mounted, and acts as the interface between the pellet store and the tanker. An integrated contact switch ensures that the boiler can be switched off during the filling process. In addition, a 230 V socket is provided for the tanker’s extraction fan.

The advantage: The pellet supplier can fill the pellet store from outside without having to enter the building. This means that pellets can be delivered even when nobody is at home. At the same time, there is no need to switch the boiler off and on manually before and after filling.

Simplifying ash disposal

Ash box bag for Nano-PK 20–32 kW
Even small additions can make an existing heating system easier to use. Ash box bags are also available as a retrofit solution for compatible Hargassner systems from 20 to 32 kW.

The heating system signals when the ash box bag is full and can then be disposed of easily, conveniently and, above all, dust-free. The innovative ash box bag is designed so that it can be easily removed from the heating system and replaced with a new bag. Thanks to its special design, the ash box bag prevents ash from escaping during transport to the waste bin, helping to keep the boiler room, stairwell and hallway clean.


Modernising operation and comfort

An older heating system does not automatically mean that its controls have to remain outdated. For Hargassner pellet heating systems manufactured from 1998 onwards (Classic 9-22, Classic 25-60 and HSV 9-22), the control system can be upgraded.

Upgrade an existing system to touch control

Old heating system, modern convenience

A conversion kit for upgrading to a modern touchscreen display is available for compatible Hargassner systems manufactured from 1998 onwards. This not only makes operation more convenient, but also makes the heating system internet-enabled and compatible with the Hargassner App and Web-App.

Touchscreen & App Ready:

This allows you to conveniently control and monitor the system on the move. Depending on the system, practical features such as push notifications when the ash box is full or fuel levels are low, as well as remote maintenance in the event of a fault, are available. The new control unit itself also offers additional optimisations, for example in ignition, combustion control and heating circuit control.

This means that even older Hargassner heating systems can benefit from modern operating convenience and smart functions without having to replace the entire heating system.

Contact your installer for further information

Distributing heat cleverly:
Solutions for microgrids

Not every heat supply stops at your own front door. If heat is generated centrally and supplied to other buildings or consumers, for example, microgrid solutions come into play.

Creating a microgrid with the ÜGS-M

The Hargassner Substation ÜGS-M is a modular solution for microgrids and is designed for outputs of up to 50 kW.

The substation is available in various configurations and can therefore be adapted to different heat supply requirements.
A particular advantage is its standardised operation: commissioning and various controller settings are quick and easy thanks to the familiar Hargassner touch-control concept.
With an optional heat meter, data such as heat consumption can also be viewed via the boiler controller, app or web interface.

 

What options does the ÜGS-M offer?

The modular design allows for different hydraulic configurations:

  • Basic module with or without a heat meter
  • Charging pump extension for buffer tank / cylinder charging
  • Heating circuit extension without diverter valve
  • Heating circuit with diverter valve extension

The ÜGS-M is designed for outputs of up to 50 kW. The Hargassner touch controller enables control of two heating circuits, one cylinder and one buffer tank. The system can also be expanded with an optional buffer tank charging and discharging function.

Which retrofit is suitable for my heating system?

From small accessories to upgrades to the system control, there are various ways to adapt an existing Hargassner heating system to meet new requirements. The existing system is always the key factor: the type of the heating system, year of manufacture, output and existing system configuration determine which upgrades and retrofit solutions are suitable.

Would you like to know which options are available for your system?
Your Hargassner contact or specialist partner will be happy to help you
find the right upgrade options for your heating system.